PSA 3 Button Smart Remote with NCF29A1M Transponder 

NCF29A1M

Transponder: NCF29A1M Tango Reads; Transponder: HITAG AES unknown Encoding: Manchester Equalizer: Regular TMpro reads: HITAG 128-bits AES – ID4A, NCF29A1M Frequency: 433Mhz Emergency Keyblade: – HU83 Battery: CR2032 Buttons: 3 buttons; Lock, Unlock and Boot. IM3A

Compatible with PSA 4A systems - A3M05, A3M15, A3M65 processors. Easy to program and unlock for reuse. Multi-stage configuration mode for accurate setup. Simple design for quick installation.

THIS REMOTE HAS A CHENGEABLE PROCESSOR  ID AND CAN BE CHANGED TO 

A3M05 A3M15 AND A3M65 PLEASE SEE PROCEDURE BELOW.

• Start by removing the back plate of the CUSTOMERS key carefully to avoid damaging clips or connectors.

• Unscrew the screws holding the inner components. Keep the screws in a safe place.

• Detach the front plate from the midframe.

• Locate the chip inside the remote, which is usually a small rectangular component.

• Open your VIRGIN KEYMOUR REMOTE by removing the back plate and battery to access the internal components.

• Identify the programming buttons: Unlock - M15, Boot - M05, Lock - M65.

• Press and hold the lock button, marked with a lock symbol.

• While holding the lock button, insert the new battery.

• Keep holding the battery and lock button firmly during id change.

• Maintain pressure for 30 seconds to change id in the the key successfully.

Programming Method: Immobiliser: Diagnostically. Remote: Diagnostically.